HIWIN Corporation
HIWIN Corporation
12455 Jim Dhamer Dr
Huntley, IL 60142
Phone: 847.827.2270
Fax: 847.827.2291
Email: info@hiwin.com
Website: www.hiwin.com
Print Back
Application:
    Semi-conductor industries, Robots, Wood machines, Laser cutting machines, Transporting equipment.
Features:
    1. Compact and high positioning:
    It is a compact design using nut and support bearing as an integral uint. 45-degree steel ball contact angle make a better axial load. Zero backlash and higher stiffness construction give a high positioning.
    2. Simple installation:
    It is installed simply by fixing the nut on the housing with bolts.
    3. Rapid feed:
    No inertial effect produced by the integral unit rotating and the shaft fixed. Can select smaller power to meet the rapid feed requirement.
    4. Stiffness:
    Have a higher trust and moment stiffness, because the integral unit have an angular contact construction. There is no backlash while rolling.
    5. Quietness:
    Special end cap design allows steel balls circulating inside the nut. Noise generated by high speed operation lower than ordinary ballscrew.
R1 Rotating Nuts
R1 Rotating Nuts 2
Unit of Measure
Items R1 Rotating Nuts
16-16S2-R1
R1 Rotating Nuts 		R1 Rotating Nuts
20-20S2-R1
R1 Rotating Nuts 		R1 Rotating Nuts
25-25S2-R1
R1 Rotating Nuts 		R1 Rotating Nuts
32-32S2-R1
R1 Rotating Nuts 		R1 Rotating Nuts
40-40S2-R1
R1 Rotating Nuts
Type N/A Rotating Nut
Nominal Diameter N/A 16 mm N/A 20 mm N/A 25 mm N/A 32 mm N/A 40 mm
F N/A 68 mm N/A 78 mm N/A 92 mm N/A 105 mm N/A 140 mm
L N/A 44 mm N/A 50 mm N/A 63 mm N/A 80 mm N/A 98 mm
T N/A 13 mm N/A 13 mm N/A 13 mm N/A 20 mm N/A 20 mm
Ball Diameter N/A 3.175 mm N/A 3.175 mm N/A 3.969 mm N/A 4.763 mm N/A 6.350 mm
D N/A 52 mm N/A 62 mm N/A 72 mm N/A 80 mm N/A 110 mm
BCD-E N/A 60 mm N/A 70 mm N/A 81 mm N/A 91 mm N/A 123 mm
Start Angle N/A 30 º
X N/A 4.5 mm N/A 4.5 mm N/A 5.5 mm N/A 6.6 mm N/A 9 mm
H N/A 11.0 mm N/A 11.0 mm N/A 15.5 mm N/A 20.0 mm N/A 21.5 mm
C N/A 11.4 mm N/A 12.0 mm N/A 16.5 mm N/A 21.0 mm N/A 22.5 mm
B N/A 40 mm N/A 50 mm N/A 58 mm N/A 66 mm N/A 90 mm
d N/A 33 mm N/A 39 mm N/A 47 mm N/A 58 mm N/A 73 mm
A N/A 2 mm N/A 2 mm N/A 2 mm N/A 3 mm N/A 3 mm
Bush Start Angle N/A 20 º N/A 20 º N/A 20 º N/A 25 º N/A 25 º
BCD-e N/A 26 mm N/A 31 mm N/A 38 mm N/A 48 mm N/A 61 mm
M (Bush Hole Thread Size) N/A M4x0.7P N/A M5x0.8P N/A M6x1P N/A M6x1P N/A M8x1.25P
G N/A 25 mm N/A 30 mm N/A 36 mm N/A 47 mm N/A 62 mm
m (Oil Hole) N/A M4x0.7P N/A M4x0.7P N/A M4x0.7P N/A M6x0.75P N/A M6x0.75P
Lead N/A 16 mm N/A 20 mm N/A 25 mm N/A 32 mm N/A 40 mm
Stiffness N/A
Dynamic Load N/A 1299 kgf N/A 1762 kgf N/A 1946 kgf N/A 3150 kgf N/A 4800 kgf
Static Load N/A 1826 kgf N/A 2531 kgf N/A 3036 kgf N/A 5035 kgf N/A 8148 kgf
Material N/A
Weight N/A