Application:
    Semi-conductor industries, Robots, Wood machines, Laser cutting machines, Transporting equipment.
Features:
    1. Compact and high positioning:
    It is a compact design using nut and support bearing as an integral uint. 45-degree steel ball contact angle make a better axial load. Zero backlash and higher stiffness construction give a high positioning.
    2. Simple installation:
    It is installed simply by fixing the nut on the housing with bolts.
    3. Rapid feed:
    No inertial effect produced by the integral unit rotating and the shaft fixed. Can select smaller power to meet the rapid feed requirement.
    4. Stiffness:
    Have a higher trust and moment stiffness, because the integral unit have an angular contact construction. There is no backlash while rolling.
    5. Quietness:
    Special end cap design allows steel balls circulating inside the nut. Noise generated by high speed operation lower than ordinary ballscrew.
Request Information
Unit of Measure
Items
R1 Rotating Nuts

R1 Rotating Nuts
R1 Rotating Nuts

R1 Rotating Nuts
R1 Rotating Nuts

R1 Rotating Nuts
R1 Rotating Nuts

R1 Rotating Nuts
R1 Rotating Nuts

R1 Rotating Nuts
Type N/A Rotating Nut
Nominal Diameter N/A 16 mm N/A 20 mm N/A 25 mm N/A 32 mm N/A 40 mm
F N/A 68 mm N/A 78 mm N/A 92 mm N/A 105 mm N/A 140 mm
L N/A 44 mm N/A 50 mm N/A 63 mm N/A 80 mm N/A 98 mm
T N/A 13 mm N/A 13 mm N/A 13 mm N/A 20 mm N/A 20 mm
Ball Diameter N/A 3.175 mm N/A 3.175 mm N/A 3.969 mm N/A 4.763 mm N/A 6.350 mm
D N/A 52 mm N/A 62 mm N/A 72 mm N/A 80 mm N/A 110 mm
BCD-E N/A 60 mm N/A 70 mm N/A 81 mm N/A 91 mm N/A 123 mm
Start Angle N/A 30 º
X N/A 4.5 mm N/A 4.5 mm N/A 5.5 mm N/A 6.6 mm N/A 9 mm
H N/A 11.0 mm N/A 11.0 mm N/A 15.5 mm N/A 20.0 mm N/A 21.5 mm
C N/A 11.4 mm N/A 12.0 mm N/A 16.5 mm N/A 21.0 mm N/A 22.5 mm
B N/A 40 mm N/A 50 mm N/A 58 mm N/A 66 mm N/A 90 mm
d N/A 33 mm N/A 39 mm N/A 47 mm N/A 58 mm N/A 73 mm
A N/A 2 mm N/A 2 mm N/A 2 mm N/A 3 mm N/A 3 mm
Bush Start Angle N/A 20 º N/A 20 º N/A 20 º N/A 25 º N/A 25 º
BCD-e N/A 26 mm N/A 31 mm N/A 38 mm N/A 48 mm N/A 61 mm
M (Bush Hole Thread Size) N/A M4x0.7P N/A M5x0.8P N/A M6x1P N/A M6x1P N/A M8x1.25P
G N/A 25 mm N/A 30 mm N/A 36 mm N/A 47 mm N/A 62 mm
m (Oil Hole) N/A M4x0.7P N/A M4x0.7P N/A M4x0.7P N/A M6x0.75P N/A M6x0.75P
Lead N/A 16 mm N/A 20 mm N/A 25 mm N/A 32 mm N/A 40 mm
Stiffness N/A
Dynamic Load N/A 1299 kgf N/A 1762 kgf N/A 1946 kgf N/A 3150 kgf N/A 4800 kgf
Static Load N/A 1826 kgf N/A 2531 kgf N/A 3036 kgf N/A 5035 kgf N/A 8148 kgf
Material N/A
Weight N/A