Application:
-
Semi-conductor industries, Robots, Wood machines,
Laser cutting machines, Transporting equipment.
- 1. Compact and high positioning:
It is a compact design using nut and support bearing as an integral uint. 45-degree steel ball contact angle make a better axial load. Zero backlash and higher stiffness construction give a high positioning.
-
2. Simple installation:
It is installed simply by fixing the nut on the housing with bolts.
-
3. Rapid feed:
No inertial effect produced by the integral unit rotating and the shaft fixed. Can select smaller power to meet the rapid feed requirement.
-
4. Stiffness:
Have a higher trust and moment stiffness, because the integral unit have an angular contact construction. There is no backlash while rolling.
-
5. Quietness:
Special end cap design allows steel balls circulating inside the nut. Noise generated by high speed operation lower than ordinary ballscrew.
Unit of Measure
Type |
N/A Rotating Nut |
Nominal Diameter |
N/A 32 mm |
F |
N/A 105 mm |
L |
N/A 80 mm |
T |
N/A 20 mm |
Ball Diameter |
N/A 4.763 mm |
D |
N/A 80 mm |
BCD-E |
N/A 91 mm |
Start Angle |
N/A 30 º |
X |
N/A 6.6 mm |
H |
N/A 20.0 mm |
C |
N/A 21.0 mm |
B |
N/A 66 mm |
d |
N/A 58 mm |
A |
N/A 3 mm |
Bush Start Angle |
N/A 25 º |
BCD-e |
N/A 48 mm |
M (Bush Hole Thread Size) |
N/A M6x1P |
G |
N/A 47 mm |
m (Oil Hole) |
N/A M6x0.75P |
Lead |
N/A 32 mm |
Dynamic Load |
N/A 3150 kgf |
Static Load |
N/A 5035 kgf |